Connecting The Mfp Print Server - Airlink101 APSMFP210 Quick Installation Manual

1 port usb 2.0 multi-functional printer server

Hide thumbs Also See for APSMFP210:

Table of Contents

Section 1

Connecting the MFP Print Server

Warning:

Only a USB printer may be connected to the USB port of the Print Server. Connecting any

other USB device to the Print Server may damage the Print Server.

Note:

Before installing the MFP Print Server, make sure you can print, scan, or fax with your multi-func-

tional printer directly connected to your computer(s).

Do not plug the power cord to the MFP Print Server until you have reached

Step 1

Connect one end of the network cable to the LAN port of the Print Server and attach the other end

of the cable to a router or switch.

Step 2

Make sure the printer is powered OFF, then connect the printer to the USB port of the Print Server

Step 3

Power ON the printer.

Step 4

Plug one end of the power cord into the Print Server and the other end into an electrical outlet.

Step 4

of this section.

Table of Contents