Table of Contents
Advertisement
DHC-2200 / 2800
Battery Installation
The attachment will operate when the battery is installed, the
power indicator LED is lit, and the operator presence switches,
and power switch are engaged. Make sure the unit is properly
positioned to prevent loss of control and possible serious
injury. Keep movable parts of the attachment off the ground and
away from objects that could become entangled or thrown.
Note: The battery comes partially charged from the factory and
needs to be fully charged before first use.
1.
Make sure power to unit
is turned off.
2.
Align ridges (A) on
battery with grooves in
power head. Slide
battery into power head.
3.
Assure the battery latch
(B) snaps into place and
battery is secure before
beginning operation.
Assure battery latch is fully engaged before using unit.
Battery Removal
To remove battery, depress
battery latch release (C)
slide battery out of power
head.
X7508280400
© 07/23 ECHO Incorporated
ASSEMBLY
B
A
C
21
Advertisement
Table of Contents
