Battery Installation - Echo DPAS-300 Operator's Manual

Handle adjustment

Battery Installation

NOTE
Collar (A) shows minimum spacing for front handle location.
1. Stand in a comfortable operating position with attachment
assembled, and position front handle for comfortable opera-
tion. Tighten handle screws.
 The attachment will operate when the battery is in-
stalled, the power indicator LED is lit, and the trigger
A
and trigger lockout are engaged. Make sure the unit is
B
properly positioned to prevent loss of control and pos-
C sible serious injury. Keep movable parts of the attach-
ment off the ground and away from objects that could
become entangled or thrown.
1. Make sure power to unit is turned off.
2. Align ridges (A) on battery pack with grooves in power head.
Slide battery pack into power head.
3. Assure the battery pack latch (B) snaps into place and bat-
tery pack is secure before beginning operation.
4. To remove battery, depress battery pack latch release (C)
slide battery pack out of power head.
Before using the unit, make sure that battery is set correctly
with battery pack latch in the complete position (D).
 Battery pack latch is in the complete position when battery
pack latch is correctly engaged.
11
Before you start
WARNING
IMPORTANT
NOTE