Other Features - Samsung AR09TXHQBWKNEU User Manual

Hide thumbs Also See for AR09TXHQBWKNEU:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
A guide on using the infrared remote is not
included in this literature package. Not all the
functions are available for the air conditioner,
please check the indoor display and remote
control of the unit you purchased.

Other Features

● Auto-Restart (some units)
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
● Anti-mildew (some units)
When turning off the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.
● Wireless Control (some units)
Wireless control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
For the USB device access, replacement,
maintenance operations must be carried out by
professional staff.
● Louver Angle Memory (some units)
When turning on your unit, the louver will
automatically resume its former angle.
● Refrigerant Leakage Detection (some
units)
The indoor unit will automatically display "EC"
or "EL0C"or flash LEDS (model dependent )
when it detects refrigerant leakage.
● Sleep Operation
The SLEEP function is used to decrease energy
use while you sleep (and don't need the same
temperature settings to stay comfortable). This
function can only be activated via remote control.
And the Sleep function is not available in FAN or
DRY mode.
Press the SLEEP button when you are ready to
go to sleep. When in COOL mode, the unit will
increase the temperature by 1°C (2°F) after 1
hour, and will increase an additional 1°C (2°F)
after another hour.
When in HEAT mode, the unit will decrease the
temperature by 1°C (2°F) after 1 hour, and will
decrease an additional 1°C (2°F) after another
hour.
The sleep feature will stop after 8 hours and the
system will keep running with final situation.
SLEEP Operation
Cool mode (+1°C/2°F) per hour for the
first two hours
Set
temperature
1hr
Heat mode (-1°C/2°F) per hour for the
first two hours
Saving energy during sleep
User manual/
Installation manual
Keep running
1hr
12

Advertisement

Table of Contents
loading

Table of Contents