Not all the functions are available for the air
conditioner, please check the indoor display
and remote control of the unit you purchased.
Other Features
Auto-Restart
•
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
Louver Angle Memory
•
When turning on your unit, the louver will
automatically resume its former angle.
Refrigerant Leakage Detection
•
The indoor unit will automatically display "EC"
or "EL0C"or flash LEDS (model dependent )
when it detects refrigerant leakage.
Page 12
Sleep Operation
•
The SLEEP function is used to decrease
energy use while you sleep (and don't
need the same temperature settings to
stay comfortable). This function can only
be activated via remote control. And the
Sleep function is not available in FAN or
DRY mode.
Press the SLEEP button when you are
ready to go to sleep. When in COOL mode,
the unit will increase the temperature
by 1°C (2°F) after 1 hour, and will increase
an additional 1°C (2°F) after another hour.
The sleep feature will stop after 8 hours and
the system will keep running with final
situation.
SLEEP Operation
Cool mode(+1 C/2 F) per hour
for the first two hours
Set
temperature
1hr
Saving energy during sleep
Keep
running
1hr