Dial A Displayed Number; Store A Call History Record In The Directory - VTech gz 2404 Operating Instructions Manual

Caller ID Operation
2. Press SELECT. The screen displays ERASE NO YES ALL and the phone number.
3. Press until ALL flashes, then press SELECT. The screen displays ERASE ALL NO
YES.
4. Press until YES flashes.
5. Press SELECT. You will hear a confirmation beep.

Dial a Displayed Number

1. Locate the record in call history you want to dial.
2. If the phone number is not in the correct format, press the # key until it is in the desired
dialing format.
Continued pressing # will change the phone number as follows:
7 digits: 555-0123
8 digits: 1-555-0123
10 digits: 973-555-0123
-OR-
11 digits: 1-973-555-0123
3. With the correct dialing format displayed, press PHONE to make the call.
-OR-
Press SELECT, then use
Press SELECT to make the call.

Store a Call History Record in the Directory

1. Locate the record in call history you want to store in directory.
2. Press SELECT, then
3. Press SELECT. Using the chart in page 10, enter up to 15 characters for the name
you're storing with the number. Use
to advance and add a space.
4. Press SELECT to move to the next row. Use
on the number.
5. Press SELECT to confirm, then follow the steps 7 through 11 in Store a Number /
Name in the Directory, on pages 11.
Display Screen Messages
PRIVATE The other party is blocking name and/or number information.
Your phone company is unable to receive information about this
UNKNOWN
caller's name and/or number.
* (after the name)
This caller has called you more than once.
or until DIAL is flashing.
or until PGM flashes.
to backspace and make corrections; use
14
to backspace and make corrections