Table of Contents
Advertisement
• The layout of your home or office might be limiting the operating range. Try moving the
Base to another location, preferably on an upper floor.
• If the buttons don't work, try placing the handset in the Base for at least 15 seconds.
If you hear other calls while using your phone:
• Press CHAN to change to another channel.
• Disconnect the Base from the modular jack and plug in a corded telephone. If you still
hear other calls, the problem is probably in your wiring or local service. Call your local
telephone service company.
If you lose a call after changing channels:
You were probably almost out of range. Move closer to the Base before changing channels.
Before placing another call, set the Handset in the Base for at least 15 seconds.
If you are unable to operate special telephone services or other equipment requiring
touch tone signals:
If you have dial pulse (rotary) service, follow the directions under "Temporary Tone
Dialing" in the TELEPHONE OPERATION section of this manual.
If the MESSAGE light on the base does not go off even after you've listened to voice
mail messages:
1 Press PROG.
2 Press
until the screen displays
3 Press SELECT. The screen displays
4 Press SELECT again to turn off the MESSAGE light on Base.
IN CASE OF DIFFICULTY
.
19
.
Advertisement
Table of Contents
