JVC GR-DVL300 Instructions Manual page 13

MENU/BRIGHT Wheel
Power Switch
Power lamp
Display
C A M E R A MEN U
1
R E T U R N
R E C M O D E S P
S O U N D M O D E L P
Z O O M
G A I N U P
T A L L Y
I D N U M B E R
D E M O . M O D E
S I D E L E D
Recording Mode Setting
Set the tape recording mode depending on your preference.
1
2
3
4
Lock Button
NOTES:
● If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
Menu Screen
● It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
● During playback of a tape recorded on another
Sub Menu
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
GR-DVL500 only
Set the Power Switch to "
the Lock Button located on the switch. The power
lamp lights and the camcorder is turned on.
Press the MENU/BRIGHT wheel. The Menu Screen
appears.
Rotate the MENU/BRIGHT wheel to select "
press it. "CAMERA MENU" appears.
Rotate the MENU/BRIGHT wheel to select "REC
MODE" and press it. The Sub Menu appears. Select
"SP" or "LP" by rotating the MENU/BRIGHT wheel
and press it. Rotate the MENU/BRIGHT wheel to
select "1RETURN", and press it twice. The Menu
Screen closes.
•Audio Dubbing ( pg. 50) and Insert Editing
( pg. 51) are impossible on a tape recorded in the
LP mode.
•"LP" (Long Play) is more economical, providing
1.5 times the recording time.
13
EN
" while pressing down
" and