Registration and Operation
Enter Base ID Code
1.
After charging the Handset, remove
it from its Charge Cradle, the
screen will display:
2.
Press NEW, then enter the 15 digit
Base Unit ID code, located on the
underside of the Base Unit.
3.
Press OK. The Handset will display:
PLEASE WAIT!!
4.
Wait approximately 15 seconds.
The Handset will display:
FOUND BASE
If the Handset displays: SYSTEM
IS BUSY PLEASE TRY LATER,
this indicates that the system is in
use. Wait until the Base Unit is in
the idle (on hook) mode, and repeat
steps 2 through 4.
Congratulations! You can now enjoy the
benefits of your multi-Handset system.
12