Change Personal Identification Number (Pin) - VTech 6042 User Manual

answering system operation

Change personal identification number (PIN)

A four-dgt securty code s requred for remote access to the answerng
system from any touch tone telephone. The factory default code s 0000.
To change the PIN on your telephone:
• Press MENU/SELECT on the handset n dle mode.
• Press
• Press
• The screen dsplays ENTEr PIN.
• Enter the PIN (default 0000) then press MENU/SELECT.
• The screen dsplays NEw PIN.
• Enter the desred PIN and press MENU/SELECT.
• The screen dsplays rEPEaT PIN.
• Enter the new PIN agan and press MENU/SELECT.
• The screen dsplays STorED and you'll hear a confirmation beep.
•
30
to reach SETUP BS. Press MENU/SELECT.
or
or to reach CHaNgE ITaD PIN. Press
MENU/SELECT.
If a wrong PIN s entered, the screen dsplays wroNg PIN, retry
after two seconds.
www.vtechphones.com
cHANGe ItAd PIN
dIAl tYPe
eNter PIN
eNter PIN
****
New PIN
rePeAt PIN