Supporting The Motorcycle - Yamaha Star XVS95B Owner's Manual

1. Nut
2. Washer
3. Remove the burnt-out bulb by pull-
ing it out.
1
1. License plate light bulb
4. Insert a new bulb into the socket.
5. Install the license plate light lens
by installing the washers and the
nuts.
PERIODIC MAINTENANCE AND ADJUSTMENT
6. Install the license plate light unit by
installing the rubber dampers,
washers and the nuts.
1
2

Supporting the motorcycle

Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other maintenance
requiring the motorcycle to stand up-
right. Check that the motorcycle is in a
stable and level position before starting
any maintenance. A strong wooden
box can be placed under the engine for
added stability.
To service the front wheel
1. Stabilize the rear of the motorcycle
2. Raise the front wheel off the
To service the rear wheel
Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing
7-33
by using a motorcycle stand or, if
an additional motorcycle stand is
not available, by placing a jack un-
der the frame in front of the rear
wheel.
ground by using a motorcycle
stand.
EAU24350
7