Table of Contents
Advertisement
8 Drain connection
Connect a 75 mm pipe or rubber hose to the machine's drain pipe, ensuring a downward flow from the machine.
Avoid sharp bends which may prevent proper draining.
Drain pump (for models WN6–8, WN6–9, WN6–11)
The drainage pipe should be located over a floor drain, drainage channel or the like.
The highest part of the drain hose shall be positioned according to the figure.
Make sure there is no kinks in the hose.
Installation manual
max
100 mm /
3 15/16 inch
650 mm ± 50 mm /
25 9/16 inch ±
1 15/16 inch
33
fig.5330
fig.X02458
Advertisement
Table of Contents
