Table of Contents
Advertisement
4. No sound from the PHONES jack
➢ Could the top panel [MASTER] volume be turned down?
➢ Check whether sound is output from the amp.
5. Effects are not applied
➢ Could the BYPASS LED be lit?
➢ Could the [EDIT] knob be set to the minimum value?
26
To do this you must disconnect the PHONES jack, since sound will not be output
from the internal speaker if headphones or a cable are connected to the PHONES
jack.
If no sound is produced from the amp, check the items listed in "No sound from the
amp," above.
If there is sound from the amp, check whether your headphones or cable might be
broken or malfunctioning.
If it is lit, the effect is bypassed. Press the [BYPASS] switch to defeat bypass. The
BYPASS LED will go dark.
Adjust the [EDIT] knob.
Hide quick links:
Advertisement
Table of Contents
