Settings In Automower ® Access; Settings In Automower ® Connect - Husqvarna AUTOMOWER 435X AWD Operator's Manual

3.14 Settings in Automower
3.14.1 To adjust the cutting height with
®
Automower Access
1. Push the STOP button to stop the product.
2. Use the jog wheel to go to
3. Use the jog wheel to go to the cutting height
icon.
4. Turn the jog wheel to change the cutting
height.
5. Push the jog wheel to select the cutting
height.
3.15 Settings in Automower
The product has factory settings but
the settings can be adapted to each
work area.
3.15.1 Timer
Timer you can change the timer
In
settings for the product. To change the
settings, obey the instructions in the
®
Automower Connect app.
The timer function controls which work hours the
product should operate and not operate. When
the product is not operating it is parked in the
charging station. The operating hours and days
can been seen in an overview in the Automower
Connect app.
The default timer setting allows the product to
operate around the clock 7 days a week. This is
normally a suitable setting for a work area
corresponding to the maximum capacity. If the
26 - Installation
®
Access
work area is less than the maximum capacity the
timer should be used to minimize wear on the
grass and to the product.
To calculate the timer setting, refer to
calculate the timer setting on page 26 .
3.15.1.1 To calculate the timer setting
1.
2.
3.
Note: The operation capacity is approximate and
is calculated for flat and open work area. If the
work area has a lot of slopes or obstacles, you
need to increase the timer settings.
Settings .
Model
Automower
435X AWD
Example: A lawn of 500 m
Automower
®
Connect
500 m
600 yd
Days /
week
7
3.15.2 Cutting height
®
There are 2 ways to adjust the cutting height:
•
Calculate the dimension of your lawn in m
2
yd .
2 2
Divide the m / yd of the lawn with the
approximate operation capacity. Refer to
table below.
The result is equal to the number of hours
that the product must operate each day.
Approximate operation ca-
2
pacity, m
®
146 / 175
2
/ 600 yd
®
435X AWD.
2
/ 146 ≈ 3.5 h.
2
/ 175 ≈ 3.5 h.
h / day Timer settings
3.5 10:00 - 13:30 / 10
am - 1.30 pm
Cutting height you can change the
In
cutting height settings for the product.
To change the settings, obey the
instructions in the Automower
Connect app.
With the jog wheel on the product. Refer to
To adjust the cutting height with
®
Automower Access on page 26 .
1035 - 001 - 04.02.2019
To
2
/
2
/ yd / h
2
, cut with an
®