Ec Declaration Of Conformity - Husqvarna AUTOMOWER 435X AWD Operator's Manual

10.1 EC Declaration of Conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden,
tel: +46-36-146500, declares that the Husqvarna
®
Automower 435X AWD with serial numbers
dating 2019 week 1 and onwards (the year and
week is clearly stated on the rating plate,
followed by the serial number), comply with the
requirements of the COUNCIL'S DIRECTIVE:
• Directive "relating to machinery"
2006/42/EC.
• Particular requirements for robotic
battery powered electrical lawnmowers
EN 50636-2-107: 2015.
• Electromagnetic fields EN 62233: 2008.
• Directive on "restriction of use of certain
hazardous substances" 2011/65/EU.
• The following standard is applied: EN
50581:2012
• Directive "relating to noise emissions from
outdoor equipment" 2000/14/EC. Refer to
Technical data on page 52 for information
regarding noise emissions and the cutting
width.
For Husqvarna Automower
The notified body 0404, SMP Svensk
Maskinprovning AB, Box 7035, SE-750 07
Uppsala, Sweden, has issued a report
regarding the assessment of conformity
according to annex VI to the Council's
Directive of May 8, 2000 "relating to noise
emissions into the environment"
2000/14/EC.
• Directive "relating to radio equipment"
2014/53/EU. The following standards have
been applied:
• ETSI EN 303 447 V1.1.1
Electromagnetic compatibility:
• ETSI EN 301 489-1 V2.2.0
For Husqvarna Automower
equipped with the Automower
module also:
• ETSI EN 301 489-19 V2.1.0
• ETSI EN 301 489-52 V3.1.1
• ETSI EN 301 908-2 V11.1.1
56 - EC Declaration of Conformity
10 EC Declaration of Conformity
®
435X AWD:
®
435X AWD,
®
Connect
For Husqvarna Automower
®
ped with Bluetooth also:
• ETSI EN 300 328 V2.1.1
• ETSI EN 301 489-17 V3.1.1
Huskvarna 2019-01-01
Lars Roos
Global R&D Director, Robotic category
(Authorized representative for Husqvarna AB and
responsible for technical documentation.)
®
435X AWD equip-
1035 - 001 - 04.02.2019