Table of Contents
Advertisement
en Childproof lock
17.5 Setting the time
Once the appliance has been connected to the mains
or after a power cut, the time flashes in the display. The
time starts at "12:00". Set the current time.
Childproof lock
18 Childproof lock
Secure the appliance to prevent children from accident-
ally switching it on or changing the settings.
Note: After a power cut, the childproof lock will no
longer be active.
Cleaning and servicing
19 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
19.1 Cleaning agent
To avoid damaging the different surfaces of the appli-
ance, do not use unsuitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
Do not use aggressive or abrasive cleaning agents.
▶
Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Appliance
Surface
Suitable cleaning agents Information
Stainless steel
¡ Hot soapy water
¡ Special stainless steel
Enamel, plastic,
¡ Hot soapy water
painted, and
screen-printed
surfaces
E.g. control panel
Knobs
¡ Hot soapy water
Ceramic hob
¡ Glass ceramic cleaner Follow the cleaning instructions on the product packaging.
Plinth drawer
¡ Hot soapy water
20
cleaning products
suitable for hot sur-
faces
Requirement: The function selector must be set to the
off
position.
1.
Use
Press .
2.
a The time that is set appears in the display.
18.1 Activating and deactivating the
childproof lock
Requirement: The function selector must be set to the
off
position.
To activate the childproof lock, press and hold the
▶
button until appears in the display.
To deactivate the childproof lock, press and hold
‒
the button until goes out in the display.
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners if the appliance is
▶
still warm.
Using oven cleaner in a hot cooking compartment
damages the enamel.
Do not use oven cleaner in the cooking compart-
▶
ment when it is still warm.
Remove all food remnants from the cooking com-
▶
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
Wash new sponge cloths thoroughly before use.
▶
Follow the instructions on cleaning the appliance.
→ "Cleaning the appliance", Page 21
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel surfaces immediately.
Apply a thin layer of the stainless steel cleaning product.
Do not use a glass cleaning product or a glass scraper.
Clean with a dish cloth and dry with a soft cloth.
Do not remove or scrub.
Remove heavy soiling using a glass scraper.
Clean with a dishcloth.
or
to set the time.
Advertisement
Table of Contents
