Siemens HLN39A0 0U Series Information For Use page 10

en Familiarising yourself with your appliance
Familiarising yourself with your appliance
6 Familiarising yourself with your appliance
6.1 Your appliance
You can find an overview of the parts of your appliance
here.
Note: On certain models, specific details such as col-
our and shape may differ from those pictured.
Explanation
Hob
1
Control panels
2
1
Cooling fan
3
Appliance door
4
1
Plinth drawer
5
Depending on the appliance specifications
1
6.2 Control panels
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
10
Controls
You can use the controls to configure all functions of
your appliance and to obtain information about the op-
erating status.
Control
Buttons and display
1
2
Function selector
3
4
Temperature selector
5
Hotplate control
Explanation
The buttons are touch-
sensitive surfaces. To se-
lect a function, simply
press lightly on the relev-
ant field.
The display shows sym-
bols for active functions
and the time-setting op-
tions.
→ "Buttons and display",
Page 11
Use the function selector
to set the types of heating
and other functions.
You can turn the function
selector clockwise or anti-
clockwise from the zero
setting ⁠ .
Depending on the appli-
ance, the function se-
lector can be pushed in.
Press on the function se-
lector to click it into or out
of the zero setting ⁠ .
→ "Types of heating and
functions", Page 11
Use the temperature se-
lector to set the temperat-
ure for the type of heating
and select settings for
other functions.
You can only turn the
temperature selector
clockwise from the zero
setting until it offers res-
istance. You cannot turn it
any further than this.
Depending on the appli-
ance, the temperature se-
lector can be pushed in.
Press on the temperature
selector to click it into or
out of the zero setting ⁠ .
→ "Temperature and set-
ting levels", Page 11
You can use the four hot-
plate switches to control
the output provided by
each individual hotplate.
The symbol above each
of the switches shows
you which hotplate is set
using that switch.