Table of Contents
Advertisement
Display
Setting
Time for selecting the cooking zone
Cookware test
You can use this function to test the quality
of the cookware.
Automatic management with power limitation
Restoring factory settings
1
Factory setting
13.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, press and hold
2.
four seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
or
to view the individual displays.
Cookware test
14 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the diameter of the cook-
ware base corresponds to the diameter of the cooking
zone being used.
Access is via the basic settings. → Page 16
14.1 Procedure for checking the cookware
Set the cookware at room temperature with approx.
1.
200 ml water in the centre of the cooking zone
whose diameter best fits the diameter of the base of
the cookware.
Call up the basic settings and select .
2.
Touch or . The
3.
zones.
a The function has been activated.
a After 20 seconds, the result appears in the cooking
zone displays.
.
Display
.
.
display flashes in the cooking
Value
- Unlimited: You can adjust the last selected cooking
zone without having to select it again.
– Limited: You can adjust the last selected cooking
zone within 10 seconds after selecting it. After this time,
you must select the cooking zone again before adjusting
it.
- Not suitable.
- Not optimal.
- Suitable.
- Deactivated: Does not show the power limit unless
1
is activated.
- Switched on: Always displays the power limit.
- Individual settings
- Factory settings.
Touch
3.
and
light up alternately as well as as a preset
a
value.
4.
Touch
for
pears.
Use
or
5.
6.
Touch and hold
a The settings are saved.
13.3 Exiting the basic settings
To exit the basic settings and and switch off the
▶
hob, touch
14.2 Checking the result
In the following table, you can check the result for the
quality and speed of the cooking process:
Result
1
If a smaller cooking zone is available, test the cook-
ware on this cooking zone.
Touch or
1
1
.
to access the basic settings.
repeatedly until the desired setting ap-
to select the required value.
for four seconds.
.
The cookware is not suitable for the
cooking zone and therefore does not
1
heat up.
The cookware is taking longer to heat
up than expected and cooking is not
progressing as well as it ought to.
The cookware is heating up correctly
and cooking is progressing well.
to activate the function.
Cookware test en
1
17
Advertisement
Table of Contents
