Getting Connected - VocoPro UHF-5800 Owner's Manual

Getting connected

System Connection
1. Connect the AC POWER ADAPTER to the UHF-5800 receiver's POWER INPUT connector, then plug the
ADAPTER into a compatible AC electrical outlet.
2. Connect the UHF-5800's receiver to a sound system, mixer or amplifier's microphone input(s) with either
one ¼" output jack for a mixed channel output, or up to four XLR output jacks for separate output for each
mic.
UHF-5800
Deciding Between Mixed or Separate Output
Mixed Channel Output
Pro: Uses only 1 mic input on an external mixer/amplifier.
Con: External mic adjustments are only applied to one mic channel.
Separate Channel Output
Pro: External mic adjustments can be applied on one or both mic channels.
Con: Uses up up to 4 mic inputs on mixer/amplifer.
Antenna Connection
Insert the antenna's BNC connector into the BNC jack and twist counter-clockwise until it locks into place.
ANT-A
IN
Antenna Attachment
V.CANCEL
OUT
V.PARTNER
VOCAL CANCEL/PARTNER
POWER
10
DSP ECHO
OUT
TAPE REC.
TAPE REC.
DSP SONIC
REVERB ENHANCER
LEVEL LOW HIGH
ANT-B
POWER