Safety Instructions For All Operations - Black & Decker BCD382 Manual

ENGLISH
5. Battery tool use and care
a. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
b. Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
c. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws, or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
d. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e. Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
f. Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion. NOTE: The
temperature „130 °C" can be replaced by the temperature
„265 °F".
g. Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
h. Never immerse the tool or battery pack in water.
Immersion in water increases the risk of oveheating, fire
and/or explosion, which may result in personal injury and
property damage.
i. Never expose the tool or battery pack to corrosive or
conductive fluids, such as seawater, industrial
chemicals, bleach or products containing bleach, etc.
Entry of corrosive or conductive fluids increases the risk
of overheating, fire and/or explosion, which may result in
personal injury and property damage.
6. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
b. Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
6
(Original instructions)

Safety Instructions for All Operations

Wear ear protectors when impact drilling. Exposure to
u
noise can cause hearing loss.
Brace the tool properly before use. This tool produces
u
a high output torque and without properly bracing the tool
during operation, loss of control may occur resulting in
personal injury.
Hold power tool by insulated gripping surfaces, when
u
performing an operation where the cutting accessory
may contact hidden wiring. Cutting accessory contacting
a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Safety Instructions When Using Long Drill Bits
Never operate at higher speed than the maximum
u
speed rating of the drill bit. At higher speeds, the bit is
likely to bend if allowed to rotate freely without contacting
the workpiece, resulting in personal injury.
Always start drilling at low speed and with the bit tip
u
in contact with the workpiece. At higher speeds, the bit
is likely to bend if allowed to rotate freely without contact-
ing the workpiece, resulting in personal injury.
Apply pressure only in direct line with the bit and do
u
not apply excessive pressure. Bits can bend causing
breakage or loss of control, resulting in personal injury.
Additional Safety Warnings for Drill/ Driver
Use clamps or other practical way to secure and
u
support the workpiece to a stable platform. Holding the
work by hand or against your body is unstable and may
lead to loss of control.
Accessories and tool may get hot during operation.
u
Wear gloves when handling them if performing heat
producing applications such as drilling metals.
Air vents often cover moving parts and should be
u
avoided. Loose clothes, jewelry or long hair can be
caught in moving parts.
Wear safety goggles or other eye protection.
u
Hammering and drilling operations cause chips to fly. Fly-
ing particles can cause permanent eye damage.
Wear ear protectors when impact drilling. Exposure to
u
noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss
u
of control can cause personal injury.
Do not operate this tool for long periods of time.
u
Vibration caused by tool action may be harmful to your
hands and arms. Use gloves to provide extra cushion and
limit exposure by taking frequent rest periods.
@
Additional power tool safety warnings
Warning! Additional safety warnings for
drills