LG WM6998HBA.ABLEEUS Owner's Manual page 46

46 MAINTENANCE
2
Hold the filter assembly over a trash can and
pull the handle on the front of the filter to
slide the mesh filter off as shown.
3
Sliding off the filter automatically removes the
lint. To clean off any residual lint, use a
vacuum cleaner or rinse the mesh filter under
running water.
• The filter must be completely dry before
using or it could cause an unpleasant odor.
CAUTION
• Do not tap the filter repeatedly as the built-in
magnet may dislodge and cause a malfunction.
4
After drying the outer filter completely,
reassemble it into the cover.
5
Insert the filter assembly into the product.
Cleaning the Inner Filter
1
Grip the external filter cover and pull it
towards you to remove it.
2
LG recommends periodic cleaning of the
condenser area for thorough cleaning. To
clean, loosen the screw with a Phillips
screwdriver.
3
Tilt the protective grille for the condenser
slightly to the left and pull it out to remove.
4
Grip the internal filter and pull straight out to
remove. Rinse it under running water.
• The filter must be completely dry before
using or it could cause an unpleasant odor.