Download Print this page

Harman Kardon AVR 355/230 Service Manual page 3

7 x 65w 7.1 channel a/v receiver

Advertisement

harman/kardon
Technical Specifications
Audio Section
Stereo Mode
Continuous Average Power (FTC):
70 Watts per channel, 20Hz - 20 kHz
@ < 0.07% THD, both channels driven into 8 ohms
7 Channel Surround Modes
Power Per Individual Channel, with all channels driven
Front L&R channels:
65 Watts per channel
@ < 0.07% THD, 20Hz–20kHz into 8 ohms
Center channel:
65 Watts
@ < 0.07% THD, 20Hz–20kHz into 8 ohms
Surround (L & R Side, Back) channels:
65 Watts per channel
@ < 0.07% THD, 20Hz–20kHz into 8 ohms
Input Sensitivity/Impedance
Linear (High Level)
Signal-to-Noise Ratio (IHF-A)
Surround System Adjacent Channel Separation
Analog Decoding
(Pro Logic, etc.)
Dolby Digital (AC-3)
DTS
Frequency Response
@ 1W (+0dB, –3dB)
High Instantaneous
Current Capability (HCC)
Transient Intermodulation
Distortion (TIM)
Rise Time
Slew Rate
Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.
All features and specifications are subject to change without notice.
Harman Kardon, The Bridge
200mV/47kohms
100dB
40dB
55dB
55dB
10Hz–130kHz
±35 Amps
Unmeasurable
16 µsec
40V/µsec**
and Logic 7 are registered trademarks of
AVR 355/230 Service Manual
FM Tuner Section
Frequency Range
Usable Sensitivity
Signal-to-Noise Ratio
Distortion
Stereo Separation
Selectivity
Image Rejection
IF Rejection
AM Tuner Section
Frequency Range
Signal-to-Noise Ratio
Usable Sensitivity
Distortion
Selectivity
Video Section
Video Format
Input Level/Impedance
Output Level/Impedance
Video Frequency Response
(Composite and S-Video)
Video Frequency
Response (Component)
General
Power Requirement
Power Consumption
Dimensions (Max)
Widt
440mm
Height
165mm
Depth
382mm
Weight net
14,4 kg
87.5–108MHz
IHF 1.3 µV/13.2dBf
Mono/Stereo: 70/68dB (DIN)
Mono/Stereo: 0.2/0.3%
40dB @ 1kHz
±400kHz: 70dB
80dB
90dB
522–1620kHz
45dB
Loop: 500µV
1kHz, 50% Mod: 0.8%
±10kHz: 30dB
PAL/NTSC
1Vp-p/75 ohms
1Vp-p/75 ohms
10Hz–8MHz (-3dB)
10Hz–100MHz (-3dB)
AC 220–240V/50Hz
AVR 355: Standby < 3W,
890W maximum
(7 channels driven)
Page 3 of 125

Advertisement

loading