Table of Contents
Advertisement
e.
chassis frame
3. To remove the LED board:
a. Lift the latch and disconnect the LED board cable from the connector on the LED board [1].
b. Remove the M2*3 screw that secures the LED board to the computer [2].
c. Lift the LED board away from the computer [3].
Installing LED board
1. Place the LED board into the slot on the computer.
2. Tighten the M2*3 screw to secure the LED board to the computer.
3. Connect the LED board cable to the connector on the LED board.
4. Install the:
a.
chassis frame
b.
SSD card
c.
WLAN card
d.
battery
e.
base cover
5. Follow the procedure in
Speaker
Removing speaker
1. Follow the procedure in
2. Remove the:
After working on your thin
Before working on your thin
client.
client.
Disassembly and reassembly
37
Advertisement
Table of Contents
