Chapter 3 Setting Up To Watch Television Chapter 3 Setting Up To Watch Television; Basic Plasma Hdtv Start Up - Vizio VP503 User Manual

Chapter 3 Setting Up to Watch Television Chapter 3 Chapter 3 Chapter 3
For 'Preparing Your PLASMA HDTV for Wall Mounting', see page 6.
3.1 Basic 3.1 3.1 3.1 Basic PLASMA Basic Basic
1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the HDTV, and then plug the
power cord into an AC wall socket.
2. Connect Audio and Video Cables to the HDTV
(see pages 14 ~ 28 for detailed steps)
3. Turning Power On
Once all the components are connected, press the Power ON button on the side of the HDTV, or
press the Power ON (Orange) button on the remote control.
4. Initial Setup
After powering on the TV set, the Initial
Setup screen will come up; please press
the button on the remote control.
►
The Language choice screen will be
displayed; the default English option is
highlighted. If you wish to change the
OSD language to Español or Français,
press the button on the remote control
▼
to select the language you want.
Press the button on the remote to go to
►
the next screen.
i
Note:
At this point, f a Set-Top Box from your
Local Cable or Satellite Service Company or other
equipment is been used; please press the LAST
key on the remote control and skip to Step 5. If
this is not your case, please continue at Step b.
Version 5/27/2008
Setting Up to Watch Television Setting Up to Watch Television Setting Up to Watch Television
PLASMA HDTV Start Up PLASMA PLASMA HDTV Start Up HDTV Start Up HDTV Start Up
www.VIZIO.com
®
VIZIO
29
VP503 HDTV10A User Manual