Vizio Remote Control - Vizio VP423 User Manual

VIZIO VP423 HDTV10A User Manual

1.5 VIZIO Remote Control

GUIDE – This button displays program information. Press this button once and the information of the
program being viewed is shown. Press it a second time and the Electronic Programming Guide will
appear in the screen.
POWER ( ) – Press this button to turn the TV on from the Standby mode. Press it again to return to
the Standby mode.
TV – Press this button to select TV.
AV – Press this button to select the Audio Video input. Pressing this button repeatedly will get you to the
AV input. Keep in mind that if S-Video cable is being used, then AV will show the signal going through this
input as the S-video takes priority.
COMPONENT – Press this button to select the Component (YPbPr) input.
HDMI – Press this button to select the HDMI input. Pressing this button
repeatedly will get you through HDMI 1, HDMI 2, HDMI 3 and HDMI 4 inputs.
MENU – Use this button for the On-Screen Display (OSD) menus. When
use within the OSD menus, pressing this key will make the selection of an
option.
- These buttons navigate the On-Screen Display (OSD).
MUTE – This button turns the sound on and off.
LAST – This button recalls the previously viewed channel when it is used in
TV mode; meaning that the TV unit has control over the signal or program
being watched. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD)
menu.
VOL (▲ or ▼) – These buttons turn the volume up
or down.
CH (▲ or ▼) – These buttons change the
channels up or down.
PIP - Pressing this key will make the picture-in
picture feature to be activated. The screen will
show the smallest screen size available when the
key is first pressed; pressing it again will display
the POP option.
SWAP – Press this button to swap between
small and big screens when in PIP mode.
FREEZE – Press it to freeze the main screen
display.
NUMBER BUTTON PAD – Use these buttons to
select a channel or enter a password.
INPUT – This button allows the user to cycle through the inputs. Repeatedly
pressing of this button will step you through the input sources in the
following sequence: TV, AV (AV/S-VIDEO), Component, RGB, HDMI 1,
HDMI 2, HDMI 3 and HDMI 4. Once you have stepped through the entire
sequence, you will return to the beginning.
- (DASH) – When selecting a digital channel directly; use this button for the separation of main and sub-
channels. For example, channel 28-2 would be selected by the button sequence 2 8 - 2.
Version 5/16/2008 12
www.VIZIO.com