Installation
Mounting
Fix the unit to a flat, vertical surface using the self-adhesive gasket supplied with the keypad enclosure.
•
The orientation of the unit has the 'TOP' uppermost
•
The location allows adequate front access
•
The screen can be viewed
Do not install other equipment that generates significant heat close to the
Firmware Update
1. Download the latest firmware version from
2. Power down the Remote Keypad and insert the USB flash
3. Power-up the remote Keypad, the update will start automatically
4. When the update is complete (status screen shown), recycle the Remote Keypad power
Note: The host units and Keypad must have the same firmware version.
MAN-AGY-023 Version 01
www.motortronics-uk.co.uk
7
keypad.
Cut-Out:
H: 4.20" (112mm)
W: 3.60" (91mm)
and copy the files to a USB flash drive