Advertisement
Connection and Operation (continued)
If any of the Modbus communication parameters are dissimilar on the host unit or remote keypad,
communication will not be established. The keypad will display the following screen:
By pressing the Right key, the user will be taken directly to the Modbus address selection menu:
If the selected Modbus address is valid, the status screen is displayed:
Selecting Units to Monitor/Configure
When the Remote Keypad is attached to multiple VMX-agility
switch between each unit by using the following method.
To simplify this selection process, it is recommended that the host VMX-agility
consecutive Modbus addresses.
(continued over)
MAN-AGY-023 Version 01
May show: Local, Remote or Modbus
Press CENTRE key
TM
units on the Modbus network, the user can
5
Only Right key is active
Use UP / DOWN
keys to select
address.
Press centre to
confirm
TM
units are configured with
Advertisement
