Connection and Operation
The remote keypad (VMX-AGY-010-N4) can be used to control,
monitor and program up to 32 VMX-agility
The unit is powered from the host VMX-agility
Ethernet cable for communication (Modbus RTU).
As the remote keypad acts as the Modbus master, no additional
master units must be placed within the network. Failure to observe
this may lead to erratic behaviour, network failure and/or equipment
damage.
Network Connection
For a configuration where there is only one VMX-agility
directly cabled. See Diagram below:
Enabling Keypad Power: Scroll to DEVICE menu → KEYPAD menu → KEYPAD PWR = ON
MAN-AGY-023 Version 01
TM
soft starters.
TM
and requires an
TM
unit (one-to-one), the remote and main unit can be
Keypad power must be enabled
on the VMX-agility
3
TM
starter (see below)