Model Description; Model Designation - Hatco FLAV-R-SAVOR FSD Series Original Instructions Manual

MODEL DESCRIPTION

All Models
Flav-R-Savor Humidified Holding and Display Cabinets come
®
in either brushed aluminum or painted Designer colors. all units
feature a digital temperature controller, air heating system,
fluorescent lamps, tempered glass side panels, and a tempered
glass door(s). Units can be configured with or without a
humidity system with low water control protection. The standard
access door can be hinged left or right. The cabinet interior top
and bottom is made of easy-to-clean stainless steel. all
available display racks are nickel-plated except the pretzel tree
display rack, which is stainless steel.
FSD-1 and FSDT-1 Models
The FSD-1 is a standard single door model with a revolving
display motor. It has a revolving and stationary rack options that
hold three to five display trays.
The FSDT-1 is a single door model with a revolving display
motor like the FSD-1, but is 127 mm (5") taller. It has revolving
and stationary rack options that hold three to seven display
trays.
On each model, the rotating rack stops automatically when the
door is opened. For details on different rack options, refer to
the OPTIONS aND aCCESSORIES section.
FSD-1 Model
NOTE: Models FSD-1 and FSDT-1 cannot be converted to
models FSD-2/FSDT-2 or FSD-2X/FSDT-2X.

MODEL DESIGNATION

No Character = Standard Height
F S D T - 1 X
Flav-R-Savor
Display Cabinet
T = Tall
FSD-2 and FSDT-2 Models
The FSD-2 and FSDT-2 are the same as models FSD-1 and
FSDT-1, but have an additional door on the opposite side of the
controls for pass-through convenience.
FSD-1X and FSDT-1X Models
The FSD-1X is a single door model with a stationary rack that
holds five display trays.
The FSDT-1X is a single door model with a stationary rack like
FSD-1X, but is 127 mm (5") taller. It has stationary rack options
that hold three to seven display trays.
For details on different rack options, refer to the OPTIONS aND
aCCESSORIES section.
NOTE: Models FSD-1X and FSDT-1X cannot be converted to
models FSD-1/FSDT-1, FSD-2/FSDT-2, or FSD-2X/
FSDT-2X.
Models FSD-2X and FSDT-2X
The FSD-2X and FSDT-2X are the same as models
FSD-1X and FSDT-1X, but have an additional door on the
opposite side of the controls for pass-through convenience.
NOTE: Models FSD-2X and FSDT-2X cannot be converted to
models FSD-2/FSDT-2.
No Character = w/ Rack Motor
X = No Rack Motor
1 = One Door
2 = Two Doors
4
FSDT-1X Model
Form No. FSDCEM1-0916