Table of Contents
Advertisement
●
Signal
Screen flickering, display position, and size can be adjusted when the analog signal is input (the
D-Sub cable is connected).
Auto Screen Adjust
Screen flickering, display position, and size can be adjusted automatically.
Selecting "Auto Screen Adjust" displays a message. Select "Yes" to enable this function.
Note
• The automatic screen adjustment function works correctly when an image is fully displayed over the entire
displayable area of the screen. They do not work properly in the below cases.
- When an image is displayed only on a part of the screen (command prompt window, for example)
- When a black background (wallpaper, etc.) is in use
Also, these functions cannot work properly in some graphic boards.
• When a signal is input into the monitor for the first time or when a resolution or vertical / horizontal scan
frequency not used before is set, the screen is adjusted automatically (only for signals with a resolution of 800
× 600 or higher).
Auto Range Adjust
Every color gradation (0 to 255) can be displayed automatically by adjusting the adjustable signal
output level.
Selecting "Auto Range Adjust" displays a message. Select "Yes" to enable this function.
Clock
Flickering of vertical lines on the screen or part of the screen can be reduced.
Note
• Use
to make fine adjustments so as not to miss any adjustment points.
Phase
Flickering and blurring over the entire screen can be reduced.
Note
• Flickering or blurring may not be eliminated completely depending on your PC or graphics board.
• After setting, adjust the "Clock" again if vertical bars appear.
Hor. Position / Ver. Position
The display position (horizontal and vertical) of the image misaligned can be adjusted.
12
Chapter 2 Advanced Adjustment / Setting
Advertisement
Table of Contents
