HP 3000 Series Installation And Service Manual page 58

Configuring MPE
3.5 LOGICAL DEVICE #?
Enter the logical device number of the INP.
After you respond to all the prompts for one device,
this LOGICAL DEVICE #? prompt is repeated to allow for
configuring additional devices. If I/O configuration
is complete, press RETURN and the system configuration
dialogue continues with step 3.80.
3.6
DRT #?
.Q
Removes the device specified in the previous
prompt from the current MPE configuration.
~ Enter the hardware DRT number for the INP.
3.7 UNIT #? ~
3 .8
SOFTWARE CHANNEL #? .Q.
3.9 TYPE? 17
3.10 SUBTYPE?
..Q.. or
.1.
(RJ E/30 0 0)
.Q. '
1.,
or 3 ( DS/30 0 0)
o
=
Synchronous switched line with a modem
1
=
Synchronous nonswitched line with a modem
3
=
Synchronous nonswitched line, hardwired
3.17
3.18
3.19
RECEIVE TIMEOU'!'?
Q-32000 or return
LOCAL TIMEOUT?
0-32000 or return
CONNECT TIMEOUT?
~-32000 or return
(20-second default)
(60-second default)
(900- second defaul t)
Prompts 3.20 through 3.22 appear only when subtype 0 was speci-
fied in prompt 3.10. (OS/3000 and RJE/3000)
3.20 DIAL FACILITY? YES or NO --
-
3.21 ANSWER FACILITY? YES or NO
3.22 AUTOMA
JIll
C ANSWER? YE S or
Jill
3. 23 DU
AL
SPEED? YES or NO
A-3