Sony STR-DE915 Operating Instructions Manual page 38

38
Additional Information
Remote Operates Function
Button
0-9, >10 Receiver Selects preset numbers
CD player/MD Selects track numbers.
deck/LD player 0 selects track 10.
TV/VCR Selects channel numbers
CH/PRESET Receiver Scans and selects preset
+/- stations
TV/VCR Selects preset channels
DISC CD player Selects discs (CD player
with multi-disc changer
only)
D.TUNING Receiver Selects the direct tuning
mode
D. SKIP CD player Skips discs (CD player with
multi-disc changer only)
CD/DVD Searches tracks (forward or
player backward)
</P> Tape deck/MD Fast forwards or rewinds
deck/VCR/LD
player
Hea /ьы CD/DVD Skips tracks
players
MD deck/LD
player
" * CD/DVD Pauses play or record. (Also
рІауег/Таре starts recording with
deck/MD components in record
deck/LD standby.)
player/VCR -
> CD/DVD Starts play
player/Tape =
deck/MD
deck/LD
player/ VCR
a CD/DVD Stops play
player/Tape
deck/MD
deck/LD
player/VCR
я Tape deck Starts play on the reverse
side
e Tape deck Sets tape decks to the record
standby mode
o+ Tape deck/MD Starts recording when
deck/ VCR pressed with Ю (or -l
on tape deck)
LEE LL 'LÉL———
Remote Operates Function
Button
RMS Tape deck Selects tape direction (tape
DIRECTION decks with the RMS*
function only)
RMSCLEAR Таре deck Clears RMS* program (tape
decks with the RMS
function only)
RMS Tape deck Programs tracks (tape deck
DIRECTION with the RMS* function
</> only)
ENTER TV/VCR/DBS Changes channels / discs
tuner/CD when used with 0-9
player
VISUAL DVD/TV/ Turns on or off the power
POWER VCR/DBS
tuner/LD
player
Turns on the TV, switches
ON the input to "TV," and sets
the remote to operate the TV
Selects the channel entry
mode, either one or two
digit (in Europe only)
Selects preset channels for
the small picture**
POSITION TV Changes the position of the
small picture
SWAP TV Swaps the small and the
large picture**
PINP TV Activates the picture-in-
picture function**
JUMP TV Jumps back and forth
between the previous and
current channels
ANTTV/VTR VCR Selects output signal from
the antenna terminal: TV
signal or VCR program
MASTER VOL TV Normally, adjusts the
+/- master volume of the
receiver.
If-TV CONTROL ON was
pressed, it adjusts the
volume on the TV.
MUTING TV Normally, mutes the sound
from the receiver.
If TV CONTROL ON was
pressed, the sound on the
TV itself is muted.
SLOPE — Not applicable
BAND => applicable
* КМ5: Random Music Sensor
** Only for Sony TVs with the picture-in-picture function