Unpacking; Hookup Overview - Sony STR-DE535 Operating Instructions Manual

Get t ing St art ed

Unpacking

Check that you received the following items with the
receiver:
• FM wire antenna (1)
• AM loop antenna (1)
• Remote commander (remote) (1)
M odel
STR-DE535
STR-DE435 and
STR-SE491
• LR6 (size-AA) batteries (3) (STR-DE535 only)
• R6 (size-AA) bateries (2)
(STR-DE435 and STR-SE491 only)
• Operating Instructions of the remote
• Operating Instructions of CONTROL A1 II
Inserting batteries into the remote
Insert the LR6 (STR-DE535) or R6 (STR-DE435 and
STR-SE491) (Size AA) batteries with the + and –
properly oriented in the battery compartment. When
using the remote, point it at the remote sensor
(STR-DE535) or g (STR-DE435 and STR-SE491) on the
receiver. For details, refer to the operating instructions
supplied with your remote.
You cannot operate the follow ing buttons on the
RM -PP402 remote (STR-DE435 and STR-SE491 only)
• VIDEO2
• VIDEO3
• DVD
• PHONO (except STR-SE491)
• SOUND FIELD A.F.D.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
4
Downloaded from: https://www.usersmanualguide.com/
Remote
RM-LJ302
RM-PP402

Hookup Overview

The receiver allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the receiver on the pages specified. To
learn the locations and names of each jack, see "Rear
Panel Descriptions" on page 28.
Video Component
Hookups (6)
TV monitor
(except STR-
SE491)
Speaker
System
TV tuner
Hookups (7)
SAT (Satellite
Front
receiver)
speaker
(L)
VCR
CD player Center
speaker
Rear M D/ Tape deck
speaker
Turntable
(L)
(except STR-
DE435)
Audio Component
Hookups (5)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the AC power cords until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.
DVD player/
AC-3 decoder
Antenna Hookups (5)
AM / FM antenna
Front
speaker
(R)
Active
w oofer
Rear
speaker
(R)