Table of Contents
Advertisement
CONFIGURATION > Enabling/disabling the Auto Power Standby function
Enabling/disabling the Auto Power Standby function
When the Auto Power Standby function is enabled, the sound bar turns off in any of the following situations.
No control operations for eight hours
(
No signal input and no control operations for 20 minutes
(
If you want to avoid forgetting to turn off the sound bar, enable the Auto Power Standby function.
Default setting: Enabled
1
Turn off the sound bar.
2
While holding down y on the sound bar, press the power button for at least five
seconds.
The Auto Power Standby function switches from enabled to disabled, or from disabled to
enabled.
The indicators show the setting status as follows, and the sound bar is turned on.
NOTE
Depending on the connected device, signals may be output even when that device is in a playback-stopped state or standby state. For
that reason, this product may not automatically turn off.
Glows: when disabled
Off: when enabled
65
Advertisement
Table of Contents
