Add-On Card (Riser Card For Bpb Connections) - ASROCK 1U4L4E Series User Manual

3.5 Add-on Card (Riser Card for BPB connections)

1. Install an add-on card to the chassis only when having a riser card installed on the server
board.
2. Before installing the add-on card, power off the server and unplug the power cord.
Removing the Riser-Card Bracket from the Chassis
This riser card bracket can only be installed in the chassis with the riser card. To remove
the bracket, simply lift up the riser card assembly.
1. Lift up the riser card assembly.
2. Release the screws.
3. Remove the riser card.
24
1
3
2
2