CONNECTIONS
SPEAKERS
The OneRemote Radio PL7 connects to Bang & Olufsen BeoLab speakers with an 8-pin cable. So
called PowerLink cables with DIN connectors. These connectors carry both right and left signals.
The speaker connection is like in any other Bang & Olufsen setup either:
1. One speaker connects to the OneRemote Radio PL7 with one PowerLink cable and the
second speaker connects in turn to the first one with another PowerLink cable.
2. Using a PowerLink splitter each speaker is connected separately with its own PowerLink
cable.
If the Bang & Olufsen BeoLab speaker is equipped with a RJ 45 socket instead of 8 pin DIN a
suitable converter cable must be used.
Tip: Share a Bang & Olufsen speaker with Bang & Olufsen another device,
www.oneremote.dk
using a OneRemote Powerlink Switch type 30017742.
8