Quick Guide, Installation Notes; Connecting Hardware; Setting Up The Oneremote Radio Pl7 - OneRemote Radio PL7 Setup Manual

Dab/dab+ – fm - bluetooth - internet radio spotify connect- music player for use with bang & olufsen speakers, control with bang & olufsen remotes

Hide thumbs Also See for Radio PL7:

Table of Contents

QUICK GUIDE, INSTALLATION NOTES

Connect to the OneRemote Radio PL7 and you are ready to setup:

• Bang & Olufsen speaker.

• IR-receiver.

Refer to the OneRemote PL7 User Guide about which buttons to use on a Bang & Olufsen remote

control.

When PL7 is connected to power it will boot and the blue LED will flash for 8 seconds. This

indicates that an option may be entered. Ignore the flashing for now.

After booting the display will show the time 00:00 as it has not yet played music from any source

and therefore does not know what time it is.

1. When PL7 is connected to power for the first time, it will ask you to select the language

and to select the terms.

Press u on the Bang Olufsen Remote control and the Blue LED will light up in the

display, indication that PL7 is now accepting commands from the remote control.

Press 1 sec on O, por the Joystick, depending on which Bang & Olufsen remote

control that you are using, to make a selection.

2. When the Setup Wizard appears, then start it. Set the time and choose from where the

time shall be updated.

3. When asked 'Keep Network connected'

shifting between radio stations will take longer.

4. Now setup the WiFi connection. Select the network and enter its password.

www.oneremote.dk

be sure to accept

this. If this is not selected,

Table of Contents