Advertisement
CONNECTIONS
POWERLINK SPEAKER CABLE
The OneRemote Radio PL3 connects to BeoLab speakers with a PowerLink cable with 8 pin DIN
connectors. These connectors hold both the right and the left channel signals. The speakers
connect as in any other Bang & Olufsen setup in one of the two following ways:
1. One speaker connects directly to the Radio PL3 with one PowerLink cable, and the other
speaker connects to that one with a second PowerLink cable.
2. Both speakers connect separately to the Radio PL3 with their own PowerLink cable.
If the BeoLab speaker is equipped with a RJ 45 socket instead of a DIN socket, a suitable adaptor
cable must be used.
INTERNET CONNECTION
The OneRemote Radio PL3 may be internet connected either via cable or WiFi.
DAILY USE
With more than one OneRemote Radio PL3 installed a Multiroom system is established, and it is
possible to enjoy different sources in different rooms.
See the User Guide for the daily use of the OneRemote Radio PL3.
See the User Guide for creation and maintenance of program lists.
www.oneremote.dk
4
Advertisement
