Power Off - Vivitar Vivicam 3705 User Manual

Beep
The camera produces a sound (beep) each time you press a camera button, if this function is enabled. Press the
select [On] or [Off] by using the

Power Off

If there is no camera activity (no buttons are pressed) for a defined period of time while the camera is powered on, the camera
will switch to an idle mode, and eventually turn itself off to conserve power.
Period of Inactivity
(batteries)
60 seconds
30 minutes
If the camera is idle, re-activate the camera by pressing any button on the camera. If the camera has powered-off you must to
turn the camera on again by pressing the
The table (above) shows the default time settings for idle, and power-off.
You can change the power saving interval by pressing the
time (from 1 to 30 minutes), and press the
48
/ buttons and then press the
Period of Inactivity
(AC power adapter)
60 seconds
30 minutes
button.
button. Then, use the
button.
button.
Camera status
Idle mode
Turn off
/ buttons to select the desired interval
button, then