Repeat Play; Program Play - Sony CMT-HP7 Operating Instructions Manual

-- Repeat Play
You can play all the tracks or a single track on a
disc.
Press REPEAT/FM MODE repeatedly until
"REP" or "REPI" appears.
REP: For all the tracks on the disc(s), or all the
tracks in the album up to five times.
REPI: For a si@e track only.
To cancel Repeat Play
Press REPEAT/FM MODE repeatedly until
both "REP" and "REP 1" disappear.
Notes
• You cannot select "PEP" and "ALL DISCS SHUF"
at the same time.
• When you select "REPl', that Wack is repeated
endlessly until "PEP1" is canceled.
-- Program Play
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programed tracks
onto a easset_e tape (page 17).
Use buttons on the remote for the operation.
1
Press CD (or FUNCTION on the unit
repeatedly) until "CD" appears.
2
3
Press PLAY MODE in stop mode
repeatedly until "PGM" appears.
Press D. SKIP repeatedly (or any one of
the buttons (DISC 1 - 5 on the unit)) to
select a disc.
To program all the tracks on a disc at once,
proceed to step 5 with "ALL" displayed.
4
Press I<1<1/WHH repeatedly until the
desired track number appears.
When programing an MP3, press ALBUM
+/.. to select an albarn, then press t,<P<l/
IHIH repeatedly until the desired {rack
number appears.
Disc number Selected track number
"O
(aO
I
-o
,<:
5
Total playing time
(including selected track)
Press ENTER (or PLAY MODE on the
unit).
The track is programed.
The program step number appears,
followed by the total playing time.
continued
11GB