Sony KP-53XBR45 Operating Instructions Manual page 5

Step 1: Installing
Ltal-meleeli-radiels mal
For the best picture quality, install the projection TV
within the areas shown below.
Optimum viewing area (Horizontal)
yy,
Preparing for your projection TV
Before you use your projection TV, adjust convergence.
For the procedure, see " Adjusting convergence
(CONVERGENCE)" on page 16.
1 Connect one rear speaker to the REAR
SPEAKER OUT R terminal and the other
speaker to the REAR SPEAKER OUT L
terminal. ae
(Rear of projection TV)
REAR SPEAKER OUT(MIN 160)
Speaker cord (supplied)
Wi:
Speaker
(supplied)
Speaker ;
(supplied)
2 Place the rear speakers as shown below to
obtain optimum surround effect.
If possible, mount the speakers on the wall to the
sides of the viewing area 60-90 cm (2-3 feet) above.
Projection TV Rear speaker
60-90 cm
(2-3 feet)
Projection TV
—
Left rear Right rear
speaker Q ea i) speaker
Note
* Be sure to match the speaker cord to the terminal colors. If the
cords are reversed, the sound will be distorted.
Getting Started 5 EN