Sony KP-53XBR45 Operating Instructions Manual page 28

aE Se a Re ce
Adjusting the speaker volume
After selecting the surround mode, adjust the volume
of each speaker to the same level so that the selected
surround sound will be even and natural. For OOPRO-
LOGIC and 003 STEREO modes, adjust the speaker
volume using the test tone feature.
1 Press MENU.
2 Press the joystick up or down to select
AUDIO and click the joystick.
3 Press the joystick up or down to sefect
SURROUND LEVEL and click the joystick.
The speaker volume setting screen appears.
tt DOLBY PRO — LOGIC
2
fr
i TS}10 BALANCE
gal: Cl TEST TONE
Easiepe) OORESE
aaa
= = &
4 fh
Use RETURNG Exit GD
RY CENTER emia
EAR
3B
T
4 Press the joystick up or down to select
CENTER, REAR or BALANCE and click the
joystick.
The selected speaker(s) in the menu is(are)
highlighted.
Choose' 'To adjust
CENTER* The level of center speaker.
REAR** The level of rear speakers.
BALANCE The level between the right and left speakers.
* The center level cannot be adjusted in the SIMULATED
mode.
"* The rear level cannot be adjusted in the 003 STEREO
mode.
5 press the joystick right or left to adjust
the volume level and click the joystick.
Use <> RETURNG Exit GE
Operations
28:
6 Repeat steps 4 and 5 to adjust other
speakers so that you hear the sound from
each speaker at the same volume.
To restore the factory settings
While the volume setting screen is displayed, press the
joystick up, down, right or left to select RESET then
click the joystick. All of the speaker levels of the
selected mode are reset to the factory setting.
Adjusting the speaker volume using
the test tone
In 00 PRO LOGIC or 003 STEREO mode, the test tone
feature makes it easy to adjust the volume level of each
speaker to the same level.
After step 3 in "Adjusting the speaker volume", follow
the procedure below:
1 Press the joystick up or down to select TEST
TONE and click the joystick.
You can hear the test tone output from each
speaker in sequence.
The test tone is output:
Front left —+ Center-— Front right + Rear
Center
PUTEST TONE
Ss)
t
9 @
2 Follow steps 4 to 6 in "Adjusting the
speaker volume".
3 Click the joystick to turn off the test tone.