Table of Contents
Advertisement
Problem
Possible cause
The camera has no
The batteries are discharged.
power.
The batteries are inserted
incorrectly.
Is the camera connected to a
computer?
The camera won't
Is the camera's power on?
capture an image.
Is the camera connected to a
computer?
The images are
The camera or subject was
blurry.
moving when the image was
capture.
The image is too
You are facing a bright light
light.
when taking the image.
TROUBLESHOOTING
Solution
Replace the batteries with freshly charged ones.
Check the battery orientation.
The camera's buttons are not functional when
connected to a PC. Disconnect the camera to
capture more images.
The camera powers off automatically after
approximately one minute. Make sure the
camera's power is ON before taking an image.
The camera's buttons are not functional when
connected to a PC. Disconnect the camera to
capture more images.
Use the TWAIN driver utility to capture an image
while connected to a PC.
Hold the camera steady to capture images. The
minimum focus distance is about two feet.
Objects closer than 2 feet will not be in focus.
Change the angle of the image so that bright
lights do not shine directly towards the camera
lens.
20
Advertisement
Table of Contents
