Erasing Pictures From Memory; Defining Picture Quality - Vivitar Vivicam 2750 User Manual

Erasing Pictures from Memory

The Erase button allows you to remove any unwanted pictures from the
memory. To remove pictures, please note that the LCD must be turned on.
1 After turning the camera on, press the Play/Record button to enter the
PLA Y mode.
2 To remove a picture, scroll to the picture then press the erase button .
A dialog asking you to confirm the deletion appears on the LCD. Press
the Self/+ button for Yes and the Flash/- button for No. After erasing a
picture, exit to the preview screen by pressing the Play/Record button
again.
3 To erase all the pictures in memory, press the Menu button. When the
options screen appears, cycle through them using the Self/+ button or
the Flash/- button until you come to the Erase All icon. Pressing
the Shutter Release button reformats both the memory card and flash
memory.

Defining Picture Quality

Your digital camera can take pictures at two different modes: Normal
(compressed) and Fine(less compressed). Both modes take pictures at 640
x 480 monitor resolution. Note, however, that your camera can only store 8
images in Normal mode or 4 images in Fine mode with 512K built-in flash
memory. (For the 2MB memory built in the camera can store up 32 images
in Normal mode or 16 images in Fine mode.)
To define your picture quality:
1 Click the Menu button to display the menu options in the LCD display.
2 Using the Self/+ or the Flash/- buttons, cycle through the options until
you have selected the Quality icon.
3 Press the Shutter Release button to change the Quality setting.
19