Erasing Pictures From Memory; Defining Picture Quality - Vivitar 2755 User Manual

Erasing Pictures from Memory

The Erase button allows you to remove any unwanted pictures from the
memory.
1 After turning the camera on, press the Record/Play button to enter the
PLA Y mode.
2 To remove a picture, scroll to the picture then press the Erase button .
A dialog ask ing you to confirm the deletion appears on the LCD. Press
the Self/+ button for Yes , the Menu button for Quit, and the Flash/- buttom
for ALL . After erasing a picture, exit to the Play mode by pressing the
Menu button again.

Defining Picture Quality

Y our digital camera can tak e pictures at two different modes: Normal(compressed)
and Fine(less compressed). Both modes tak e pictures at 640 x 480 monitor resolution.
Note, however, that your camera can only store 32 images in Normal mode or 16
images in Fine mode with 2MB built-in flash memory.
T o define your picture quality:
1 Click the Menu button to display the MAIN MENU options on the LCD
display.
2 Using the Self/+ or the Flash/- buttons, cycle through the options until
you have selected the Quality option.
3 Press the Menu button into the Quality sub menu , use the Menu button
to change quality setting .Then use the Self/+ button to set , or the Flash/
- button to quit without change.
20