Table of Contents
Advertisement
To download images to your computer, you need to attach the digital cable
to the digital port below the video port, and the other end of the cable to
the back of your computer. Once both ends are properly attached, use the
software included with this camera to capture the queued images stored
within it to your computer's hard disk, where you can later print them out or
edit them in imaging software.
The camera's digital output connector can be set to transmit data at varying
baud rates, depending upon the capabilities of your computer. If the camera,
while attached to your computer, remains inactive for a given length of
time, it shuts down automatically.
Installing capture software
Once you have got your camera connected to your computer, the next
step is to transfer the pictures contained in the camera memory to your
computer's hard disk. However, this cannot be accomplished until your first
install the appropriate capture drivers and software.
1 Insert the CD-ROM disc into your CD-ROM drive.
2 If you are in Windows95, select the Run command from the Start menu.
When the Run dialog box opens, type E:\setup in the entry line and click
OK, where E is the drive letter of your CD-ROM drive.
If you are on a Macintosh, double-click the installer icon.
3 The setup program begins - simply follow the on-screen instructions to
complete the installation.
22
Advertisement
Table of Contents
