Table of Contents
Advertisement
Entering Sleep Mode
The sleep mode function reduces the amount of power consumed by the machine by disabling power flow to the
operation panel. If no operations are performed on the machine for a while, such as during a lunch break, the
machine enters sleep mode automatically.
When in sleep mode
●
When the machine enters sleep mode, the display turns off.
Situations in which the machine does not enter sleep mode
●
When the machine is in operation
●
When the Job indicator is lit up or blinking
●
When the machine is performing an operation such as adjustment or cleaning
●
When a paper jam occurs
●
When the menu screen is displayed
●
When an error message is displayed on the screen (There are some exceptions. The machine sometimes
enters sleep mode when an error message is displayed.)
●
When the machine is waiting for a wireless LAN connection or Direct Connection
Changing the Auto Sleep Time Value
Auto Sleep Time is a function that automatically puts the machine into the sleep mode if it remains idle for a
specified length of time. We recommend using the factory default settings (
reduce power usage. If you want to change the amount of time that elapses before the machine enters the auto
sleep mode, perform the procedure below.
<Menu>
machine automatically enters sleep mode
Exiting Sleep Mode
You can press any key other than the power switch to exit the sleep mode.
Basic Operations
<Timer Settings>
<Auto Sleep Time>
Set the amount of time that elapses before the
99
27WS-028
<Timer Settings>(P. 187) ) to
Advertisement
Table of Contents
