Table of Contents
Advertisement
Entering Sleep Mode
The sleep mode function reduces the amount of power consumed by the machine by temporarily stopping some
internal operations. You can set up the machine to enter sleep mode automatically when it remains idle for a certain
length of time. The factory default setting for the amount of time that elapses before the machine enters sleep mode
is 1 minute. We recommend using the factory default setting to save the most power. If you want to change the
amount of time that elapses before the machine enters sleep mode, follow the procedure below in the Printer Status
Window.
Situations in which the machine does not enter sleep mode
●
When the machine is in operation
●
When the Job indicator is lit up or blinking
●
When the machine is performing an operation such as adjustment or cleaning
●
When a paper jam occurs
Changing the Auto Sleep Time Value
1
Select the machine by clicking
2
Select [Options]
3
Make sleep mode settings, and click [OK].
[ Auto Sleep After]
Specify the length of time after which the machine enters sleep mode. You can select from 1 to 30 minutes.
Basic Operations
in the system tray.
[Device Settings]
[Sleep Settings].
40
2754-00Y
Advertisement
Table of Contents
