Pulsed Mig - Wire And Gas Selection Table - Miller AlumaPower 350 MPa Auto-Line CE Owner's Manual

7-5. Pulsed MIG - Wire and Gas Selection Table

WIRE TYPES*
Aluminum
*Wire diameter in inches (mm). Refer to section 6-2 to change displayed units.
.
Other normal gas mixtures can be used by adjusting arc length and sharp arc. Use the program closest to your gas mixture and wire type and
size.
Notes
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
.035 (0.9) AL49 (4943)
.040 (1.0) AL49 (4943)
3/64 (1.2) AL49 (4943)
1/16 (1.6) AL49 (4943)
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
GAS TYPES
ARGN (ARGON)
ARGN (ARGON)
HE AR25 (HELIUM / ARGON)
OM-245 182 Page 31