Miller AlumaPower 350 MPa Auto-Line CE Owner's Manual page 16

Do not weld on drums or any closed containers.
Do not remove or paint over (cover) the label.
When power is applied failed parts can explode or cause other parts to explode.
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Always wear long sleeves and button your collar when servicing unit.
Disconnect input plug or power before working on machine.
V
>60s
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
= < 60°
OM-245 182 Page 12
Hazardous voltage remains on input capacitors after power is turned
V off. Do not touch fully charged capacitors. Always wait 60 seconds
after power is turned off before working on unit, OR check input ca-
pacitor voltage, and be sure it is near 0 before touching any parts.
V
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Become trained and read the instructions before working on the
machine or welding.
Always lift and support unit using both handles. Keep angle of lifting
device less than 60 degrees.
Use a proper cart to move unit.
Safe16 2012−05
Safe20 2012−05
Safe26 2012−05
Safe27 2012−05
Safe28 2012−05
Safe30 2012−05
Safe42 2012−05
Safe38 2012−05
Safe40 2012−05
Safe44 2012−05